Plastic Model Kit
This 1:24 scale assembly model kit is based
on the 7th incarnation of the Toyota Celica.
Overall length: 182mm, overall width: 81mm.
Stylish form has been authentically recreated.
Door trim and inner panels have been finished in smooth foam.
"Cross-over cockpit" features separately molded inner door piece recreated in stunning detail.
Steering wheel can be assembled on either right or left side.
Front struts, rear double wishbone suspension, exhaust pipe,
and chassis under-surface all overflow with authenticity.
Below the front undercover, the bottom of the engine and
transmission can also been seen.
Wheels and headlights have been prepared as metal plated parts.
Nylon mesh for the openings in the front bumper also included.
"Toyota" mark on the front has also been reproduced as metal transfer.
Paint and Glue Required
Quality 1:24 Scale Plastic Model Kits
By Tamiya 74-T24215
Leaders in Manufacturing Quality
2 or 4 Wheel Drive Remote Control Vehicles
1:10, 1:12 & 1:14 Scale RC Kits
2WD and 4WD Models Available
More from Tamiya
1:14 Scale Tamiya Grand Hauler Custom
RC Truck Kit
Custom Big Rig
Take control of your very own big rig - this R/C model assembly kit
recreates a massive boxy, customized truck like those seen in North America.
The model's ladder frame chassis features aluminum side channels
with resin cross members and is equipped with a highly realistic suspension utilizing metal leaf springs and friction dampers.
A front-mounted motor and 3-speed transmission power
the two rear wheel axles, which are fitted with built-in differentials
to enable smooth cornering. A 4-channel R/C system and multi-function unit
allow you to drive the vehicle and experience realistic lights,
sounds and vibrations.
Enjoy that customized mood, enhanced by metal plated parts such
as the front bumper and radiator grille.
The roof also features plated horn and light bezel parts.
LEDs can be inserted to light up your model!
Plated side mirror parts also include kerb mirrors.
Moving metal stays allow adjustment of mirror position.
Further detail is added to the oversized air cleaners,
with photo-etched parts depicting air intakes.
The cab oozes a custom mood, enhanced by parts such
as the bulky metal plated sun visor.
Lowered step provides storage location for MFC unit.
Fuel tanks are also mounted low under the body.
Model utilizes metal pipes to depict mufflers,
while their optional covers are gleaming metal-plated resin.
Low-down rear bumper offers multiple lamp positions,
compatible with LEDs. Fender parts are included.
Length 692mm, Width 192mm, Height 330mm
Weight Approx. 3.9kg (*with all equipment attached)
Track: 156mm (Front), 138mm (Rear, Double Tire)
Chassis: Aluminum & Polycarbonate Resin Ladder Frame
Suspension: Front/Rear Leaf Springs
Caster Angle (Front/Rear): 0Â°/0Â°
Camber Angle (Front/Rear): 0Â°/0Â°
Toe Angle (Front/Rear): 0Â°/0Â°
Dampers: Front/Rear Aluminum Friction Dampers
Drivetrain: Rear 2-Axle Drive
Transmission: 3-Gear Transmission (gear shifting operated from transmitter)
Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1, (3rd Gear) 10.66:1
Diff Gear: 3-Bevel Diff.
Motor: Type 540
Tire Width 22mm (Front/Rear)
Tire Diameter 83mm (Front/Rear)
Quality RC Truck Kits
By Tamiya 79-T56344
1:12 Scale Tamiya
Land Cruiser 40 Pick-up GF-01 Chassis
4WD RC Kit
This R/C model recreates the iconic off-roader with
a polycarbonate pick-up truck style body and resin driver figure.
It is mounted on the new gear-driven 4WD GF-01 chassis unit,
using huge tires to hustle across poor terrain.
GF-01: Square Set-up, Excellent Performance
This gear-driven 4WD chassis is based around a lightweight
and tough monocoque frame, with power provided
by the centrally-positioned motor. It utilizes a 'square'
setup with near-identical tread and wheelbase lengths.
Sealed gearbox is integrated into the frame
while the built-in front and rear differential gears provide smooth cornering.
This is reinforced by 4-wheel double wishbone suspension
and friction dampers plus a 2-piece tie rod steering setup
with the servo on the left for excellent response. Furthermore,
it has 5-spoke metal-plated wheels fitted with big 110mm diameter tires,
in addition to a rear support bar with roller to prevent the model from flipping.
The cute and jolly body is made from durable polycarbonate and comes with a driver figure.
Length: 333mm, Width: 244mm, Height:242mm
Wheelbase: 174mm, Track (Front & Rear): 194mm,
Tire Width/Diameter: 50mm/110mm
3-Bevel Type Differentials
2-Piece Steering Tie-Rod
Front & Rear Double Wishbone Suspension
Gear Ratio 18.03:1
Includes Torque Tuned Type 540 Motor
Electronic Speed Controller
Quality RC Car Kits
By Tamiya 76-T58589
Tamiya Land Freeder CC-01 Chassis
4WD RC Car Kit
It features a realistic polycarbonate body
with added metal-plated parts for fog lamps, grille guard
and roll bar to give a grizzled and tough-looking finish.
The shaft-driven 4WD CC-01 chassis is perfect for off-road driving,
particularly when combined with the tread-pattern tires
which are mounted on the model's flat-finish wheels.
The highly reliable and efficient full-time 4WD system features
a midship motor, which transmits power to the front wheels via the gearbox
and to the rear wheels via a drive shaft.
Front and rear differentials enable smooth cornering,
and for even greater off-road performance on rough terrain,
the rear differential may be locked during assembly.
The chassis suspension employs double-wishbone front upper I-arms
and lower H-arms plus rear rigid suspension.
With 4 CVA dampers in total fitted to the front and rear
Length: 455mm, Width: 193mm, Height: 181mm, Weight 1,330g
Wheelbase: 242mm, Tread (F/R): 163mm
Tire Width/Diameter (Front & Rear): 29/78mm
Ladder Frame Bathtub Type Chassis
Longitudinally-Placed Motor & Shaft-Driven Full-Time 4WD
Front and Rear 3-Bevel Differential Gears
Front Suspension: Double Wishbone
Rear Suspension: 4-Link Rigid
Front and Rear CVA Oil Dampers
Gear Ratio = 1:14.67
540 Type Motor included
Includes Forward and Reverse Electronic Speed Controller
Quality RC Car Kits
By Tamiya 76-T58579
Tamiya Stadium Thunder Pick Up
2WD RC Kit
Bring the Thunder
This is a re-release version of the Stadium Thunder
R/C pick-up truck assembly kit, which was inspired
by the popular stadium racing truck designs seen in the United States
. The polycarbonate body realistically captures the ground-hugging
form of the truck and its livery can be easily depicted
with the included stickers. The model also features fluorescent yellow wheels to provide an eye-catching accent.
Tough RWD Off-Road Chassis
The lightweight ABS bathtub chassis is easy
to assemble and features a rear-mounted motor,
rear-wheel drive layout. Power is delivered via a fully-enclosed gearbox which is equipped with a differential.
The 4-wheel independent double wishbone suspension is equipped with C.V.A. shock units and extremely durable monocoque lower arms.
Large diameter tires provide dynamic off-road handling.
The front spiked tires feature three ribs for enhanced stability
while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high grip.
Length: 420mm, Width: 295mm, Height: 170mm
Wheelbase: 260mm, Tread: 248mm (Front), 242mm (Rear), Tire Width/Diameter: 45/98mm (Front), 52/99mm (Rear)
ABS Bathtub Type Chassis Frame
Rear-Mounted Motor, Rear-Wheel Drive
3-Bevel Differential Gear
F/R Double Wishbone Suspension
F/R CVA Oil Dampers
Gear Ratio = 1:10.00
Type 540 Motor
Quality RC Model Kits
By Tamiya 76-T58524
Tamiya Pumpkin Black Edition RC Kit
A Timeless Classic
This R/C assembly kit features a highly detailed pick-up truck body
that is reminiscent of the classic 1950s American designs.
Decked out in black accentuated by the metal plated front grille,
overhanging fenders, dampers and roll bar
The durable and easy-to-assemble 2WD chassis employs a box type frame,
front swingarm independent and rear rolling rigid suspension.
Big 115mm diameter semi-pneumatic tires on yellow wheels
offer dynamic running on even the toughest of surfaces.
The sealed gearbox protects diff gear from dirt and
sand during off-road driving and a rear mounted wheelie bar
enables wild wheels in the air stunt driving.
Length: 385mm, Width: 290mm, Height: 260mm, Weight: 1,560g
Wheelbase: 207mm, Track: 212mm (Front), 216mm (Rear)
F/R Tire Width/Diameter: 115/71mm
ABS Box Type Frame – Rear-wheel 2WD
Suspension: Independent Swingarm (Front), Rolling Rigid (Rear)
F/R Friction Dampers – 2-Piece Steering Tie-Rod
Gear Ratio: 14.7:1
Type 540 Motor
Includes Forward/Reverse Electronic Speed Controller
Quality RC Car Kits
By Tamiya 76-T58547
1:10 Scale Tamiya Neo Scorcher (TT-02B)
4WD RC Buggy Kit
The Scorcher, a popular and speedy 4WD racing buggy is back
with a new name and updated body!
Made from durable polycarbonate and featuring a stylish large rear wing,
the body design drew heavily upon the original Scorcher for inspiration
The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame.
Its suspension setup uses 4-wheel independent double wishbone suspension
with long arms, plus CVA shock units, while L/R suspension arms and uprights
are identical to facilitate hassle-free assembly.
Sealed F/R gearboxes include 4-bevel differentials for smooth operation
The top can be removed simply by loosening 4 screws,
making maintenance a breeze.
Of course, this off-road chassis also includes receiver case
and motor cover to protect them from dirt and debris
4-wheel independent suspension features long arms and CVA shock units.
Length: 380mm, Width: 250mm, Height: 145mm
Wheelbase: 266mm, Track: 217mm (Front), 208mm (Rear)
Tire Width/Diameter: 32/82mm (Front), 41/82mm (Rear)
Front/Rear 4-Bevel Resin Differentials
3-Piece Steering Tie-Rod
4-Wheel Double Wishbone Suspension
Front/Rear CVA Oil Dampers
Gear Ratio 10.71:1 (using kit-included pinion gear)
Type 540 Torque Tuned Motor
Electronic Speed Controller
Quality 1:10 Scale RC Car Kit
By Tamiya 76-T58568